Description
Order no. |
Pull-in/locking force up to [kN] |
Holding force* [kN] |
Weight [Kg] |
---|---|---|---|
303560 | 30 | 55 | 3,2 |
Order No. |
dia. D | dia. DN | dia. D1 | H | HA | dia. LK | M | T |
---|---|---|---|---|---|---|---|---|
303560 | 148 | 40 | 102 | 57 | 15 | 118 | M8 | 42 |
Pneumatic opening.
Opening operating pressure: min. 8 bar – max. 12 bar
Retensioning operating pressure (turbo): min. 5 bar – max. 6 bar
Cover and piston hardened.
Repeatability < 0.005 mm.
Zero-point clamping system for set-up-time-optimised clamping during cutting and non-cutting machining.
The installation clamping module has high holding, pull-in and locking forces. This is opened pneumatically (1) and mechanically locked through spring force. To achieve the specified pull-in and locking forces, it must be briefly retensioned pneumatically (turbo) (2). Subsequent uncoupling of the pressure lines is possible at all times (module is tensioned pressure-free). Use of the pneumatic pressure booster 6370ZVL-005 is recommended.
The clamping module has two connections:
1x pneum. opening (1) / 1x pneum. retensioning (turbo) (2).
Use “Unitool” modules exclusively with “Unitool” modules in one clamping.
* Please observe the installation instructions.
– Installation diagrams
Order no. |
Pull-in/locking force up to [kN] |
Holding force* [kN] |
Weight [Kg] |
---|---|---|---|
303560 | 30 | 55 | 3,2 |
Order No. |
dia. D | dia. DN | dia. D1 | H | HA | dia. LK | M | T |
---|---|---|---|---|---|---|---|---|
303560 | 148 | 40 | 102 | 57 | 15 | 118 | M8 | 42 |
Reviews
There are no reviews yet.