Description
Order No. |
Size | Pull-in/locking force up to [kN] |
Holding force [kN] |
Weight [g] |
---|---|---|---|---|
305953 | K 5 | 5 | 13 | 150 |
Order No. |
Size | dia. D | dia. DN | dia. D1 | H | HA | dia. LK | T |
---|---|---|---|---|---|---|---|---|
305953 | K 5 | M45 x 1 | 15 | 39 | 19,8 | 5,8 | 36 | 14 |
Hydraulic opening.
Opening operating pressure: min. 50 bar – max. 60 bar
Cover and piston hardened.
Repeatability < 0.005 mm.
Zero-point clamping system for set-up-time-optimised clamping during cutting and non-cutting machining. With small space requirement and low installation height.
The installation clamping module has high holding, pull-in and locking forces. This is opened hydraulically (1) and mechanically locked through spring force. Subsequent uncoupling of the pressure lines is possible at all times (module is tensioned pressure-free).
The contact surface is the upper surface of the housing.
The clamping module has one connection: 1x hydr. opening (1).
For simple installation, we recommend the AMF face spanner under order no. 41046.
* Please observe the installation instructions.
– Installation diagrams
Order No. |
Size | Pull-in/locking force up to [kN] |
Holding force [kN] |
Weight [g] |
---|---|---|---|---|
305953 | K 5 | 5 | 13 | 150 |
Order No. |
Size | dia. D | dia. DN | dia. D1 | H | HA | dia. LK | T |
---|---|---|---|---|---|---|---|---|
305953 | K 5 | M45 x 1 | 15 | 39 | 19,8 | 5,8 | 36 | 14 |
Reviews
There are no reviews yet.