6101L Clamping module with sensor monitor and mounting flange
Pneumatic opening.
Opening operating pressure: min. 8 bar – max. 12 bar
Re-clamping operating pressure (turbo): min. 5 bar – max. 6 bar
Cover and piston hardened.
Flange housing: Stainless steel
Repetition accuracy < 0.005 mm.
Application:
Zero-point clamping system for automation solutions for set-up-time-optimised clamping during cutting and non-cutting machining.
Note:
The installation clamping module with sensor query contains 2 inductive sensors (connection type: S8 plug, cable length: 150 mm) for status check (opened / locked). This is pneumatically opened (1) and mechanically locked through spring force. To achieve the specified pull-in and locking forces, it must be briefly retensioned pneumatically (turbo) (2). Subsequent uncoupling of the pressure lines is possible at any time (module is clamped pressure-free).
Use of the pneumatic pressure booster no. 6370ZVL is recommended.
The clamping module has two connections:
1 = pneum. opening
2 = pneum. retensioning (turbo)
* Please observe the installation instructions.
Reviews
There are no reviews yet.