Pneumatic opening.
Opening operating pressure: min. 8 bar – max. 12 bar
Re-clamping operating pressure (turbo): min. 5 bar – max. 6 bar
Cover and piston hardened.
Flange housing: Stainless steel
Repetition accuracy < 0.005 mm.
Zero-point clamping system for automation solutions for set-up-time-optimised clamping during cutting and non-cutting machining.
The installation clamping module with sensor query contains 2 inductive sensors (connection type: S8 plug, cable length: 150 mm) for status check (opened / locked). This is pneumatically opened (1) and mechanically locked through spring force. To achieve the specified pull-in and locking forces, it must be briefly retensioned pneumatically (turbo) (2). Subsequent uncoupling of the pressure lines is possible at any time (module is clamped pressure-free).
Use of the pneumatic pressure booster no. 6370ZVL is recommended.
The clamping module has two connections:
1 = pneum. opening
2 = pneum. retensioning (turbo)
* Please observe the installation instructions.
| Order No. |
Size | Pull-in/locking force up to [kN] |
Holding force [kN] |
Weight [Kg] |
|---|---|---|---|---|
| 552963 | K10 | 8 | 25 | 2,4 |
| 552964 | K20 | 17 | 55 | 6,9 |
| 552965 | K40 | 30 | 105 | 11,0 |
| Order No. |
Size | dia. D | dia. DA | dia. DN | E | E1 | H | HA | K | K1 | dia. LK | dia. M | dia. N H7 | R | W | W1 | W2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 552963 | K10 | 78 | 104 | 22 | 10,0 | – | 37 | 44 | 28 | 11 | 90 | 6,6 | 8 | G1/8 | 6,4° | 45° | 45° |
| 552964 | K20 | 112 | 143 | 32 | 10,0 | 24 | 38 | 48 | 26 | – | 127 | 9,0 | 8 | G1/8 | 7,5° | – | 45° |
| 552965 | K40 | 148 | 188 | 40 | 13,6 | 31 | 47 | 62 | 32 | – | 168 | 11,0 | 10 | G1/8 | 5,0° | – | 45° |
Reviews
There are no reviews yet.