Mechanical opening and closing.
Tempered steel, plasma-nitrided and burnished.
Repetition accuracy 0.01 mm.
Mechanical zero point clamping system for time-optimised clamping during cutting and non-cutting machining. Especially suitable for the modular design of clamping solutions via zero point clamping system.
The mechanical assembly clamping module has high holding, pull-in and locking forces.
The clamping module can be positioned on the machine table and fastened with standard clamping elements at the circumferential clamping rim.
The positioning bore for stop sleeves and a through-hole for fastening onto grid plates with countersunk head screws are present underneath (observe the max. permitted screw force). The mounting bore for the K20 pull-stud is also in the module.
Pull-stud: The K10 and K20 versions of the pull-studs are used with this mechanical clamping module. The zero point, sword or undersize pull-stud can be used, depending on the application.
This clamping module can be used at ambient temperatures of up to max. 200°C.
* Please observe the installation instructions.
| Order No. |
Size | Pull-in/locking force up to [kN] |
Holding force [kN] |
Tightening torque [Nm] |
Weight [g] |
|---|---|---|---|---|---|
| 546085 | K10 | 6 | 25 | 30 | 1064 |
| 535617 | K20 | 10 | 55 | 30 | 3330 |
| Order No. |
Size | dia. B1 | dia. D | dia. D1 | dia. D2 | dia. DN | E1 | H ±0.01 |
H1 | H2 | H3 | L | R | S1 | SW |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 546085 | K10 | 9,0 | 78 | 15 | 15 | 22 | 4,5 | 32 | 22,0 | – | – | 93 | 50 | – | 10 |
| 535617 | K20 | 13,5 | 112 | 25 | 16 | 32 | 10 | 50 | 35,5 | 20 | 11 | 132 | 80 | 5,5 | 13 |
Reviews
There are no reviews yet.