Housing: tempered steel, gas-nitrided and oxidised.
The adjustable support element allows workpieces or fixtures to be received into the bore for the pull-stud, K10 or K20 depending on the version, and clamped to the main or intermediate elements. Thanks to the adjustment and counter option, the support element can be steplessly adapted to the workpiece contour by ± 5 mm.
This clamping system can be used to move workpieces to the required machining height in the machine for 5-sided machining, or for the safe and quick clamping of workpieces with ledges and different clamping heights on the machine table.
Order numbers for the centering sleeves:
– Ø15: Order no. 535732
– Ø16: Order no. 78006
– Ø22: Order no. 78238
Simple, quick and flexible clamping of complex workpiece contours on the machine table. Especially suitable for levelling workpieces or clamping fixtures at the necessary machine heights in the machine tool and for the reliable clamping of same.
| Order No. |
Size | H ±0.01 |
Weight [g] |
|---|---|---|---|
| 532416 | K10 | 95-105 | 974 |
| 532432 | K20 | 95-105 | 2020 |
| Order No. |
Size | dia. B1 | dia. D | dia. D1 | dia. D2 | dia. D3 | dia. D4 | E1 | G | H1 | M | R | S1 | SW | SW1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 532416 | K10 | 9 | 78 | 15 | 15 | 35 | 38 | 5,0 | M8 | 98-108 | M8 | 50 | 4,5 | 30 | 27 |
| 532432 | K20 | 13 | 112 | 25 | 16 | 43 | 45 | 11,5 | M12 | 100-110 | M12 | 80 | 5,5 | 41 | 30 |
Reviews
There are no reviews yet.